Is there a list of all the keyboard shortcuts in Lumion?

Article Details



Poster: Morten
Article ID: 621
Posted: Tue 02 Feb 2016
Approved: Yes

QUESTION
Is there a list of all the keyboard shortcuts in Lumion?

ANSWER
Yes, please see the list below:

NAVIGATION
(W) / (Up arrow): Move camera forward.
(S) / (Down arrow): Move camera backward.
(A) / (Left arrow): Move camera left.
(D) / (Right arrow): Move camera right.
(Q): Move camera up.
(E): Move camera down.

(SPACEBAR) + (W/S/A/D/Q/E): Move camera very slowly.
(SHIFT) + (W/S/A/D/Q/E): Move camera faster.
(SHIFT) + (SPACEBAR) + (W/S/A/D/Q/E): Move camera very fast.

Right Mouse Button + Move mouse: Look around.
Middle Mouse Button + Move mouse: Pan camera.
(SPACEBAR) + Middle Mouse Button + Move mouse: Pan camera very slowly.
(SHIFT) + Middle Mouse Button + Move mouse: Pan camera faster.
(SHIFT) + (SPACEBAR) + Middle Mouse Button + Move mouse: Pan camera very fast.
Mousewheel up/down: Move camera forwards/backwards.

(CTRL) + (H): Reset camera pitch to horizontal viewpoint.
(O) + Right Mouse Button : Orbit camera.
Double-click with Right Mouse Button on models: Instantly 'teleport' to the position that you clicked on.
 

MISCELLANEOUS
(F1): Editor quality: 1 Star (Shadows off and some Movie effects off).
(F2): Editor quality: 2 Stars (Soft shadows off).
(F3): Editor quality: 3 Stars (Low-quality terrain and terrain shadows off).
(F4): Editor quality: 4 Stars (Highest quality level).
(F5): Quick save (Saves a file called QuickSave).
(F7): View the Lumion terrain at the maximum level of detail.
(F8): Hold down this key to temporarily show shadows from spotlights.
(F9): If you press F9, all trees and plants in the viewport will be rendered at their best level of detail, so that it's easier to see where you need to add more trees and plants in a scene.

Settings -> (CTRL) + (F11): Go to Settings before pressing these keys to toggle between Full-screen and Windowed mode.
Settings -> (F11): Maximize window with/without taskbar (press twice to toggle).

Sliders: You can double-click on most sliders in Lumion to manually type in values. Press Shift while adjusting slider values to fine-tune them (more digits after the decimal point will be displayed).
 

SAVE & LOAD CAMERA VIEWPOINTS
(CTRL) + (1) (2) … (9) (0): Use these keys to save up to 10 camera viewpoints in Photo Set 1 in Photo mode.
    • When using MyLumion, the Photos are saved only for MyLumion Viewpoints.
(SHIFT) + (1) (2) … (9) (0): Load previously saved camera viewpoints. The saved slots are also available as easily accessible thumbnail images in Photo Set 1 in Photo mode.


 

SELECTING, COPYING AND MOVING



Place Mode (Objects) ->
(CTRL) + Drag with Left mouse button: Rectangular selection tool for selecting multiple objects.
(CTRL) + Left mouse button: Click on the object icon of an object to add it to or remove it from an existing selection.
(CTRL) + (SHIFT) + Drag with Left mouse button: Add new rectangular selection to existing selection.
(CTRL) + Click anywhere with Left Mouse Button: Deselect all objects.
(CTRL) + Left Mouse Button: Randomly place 10 copies of the currently active object library model.
(V) + Left Mouse Button: Place a new object with +/-0 to 50% random scale.
(CTRL) + (V) + Left Mouse Button: Combined operation of above mentioned Place Object mode.  Randomly place 10 copies of the currently active object library model  with +/-0 to 50% random scale.
(ALT) + Move selected object(s): Copy-paste selected object(s) by pressing (ALT) while dragging one of the selected objects.



Move Mode (Objects) ->
Left mouse button: Click on the object icon of an object to select/de-select it.
Drag with Left mouse button: Rectangular selection tool for selecting multiple objects.
(SHIFT) + Drag with Left mouse button: Add new rectangular selection to existing selection.
Click anywhere with Left mouse button: Deselect all objects.
(ALT) + Move selected object(s): Copy-paste selected object(s) by pressing (ALT) while dragging one of the selected objects.

Both Place and Move Mode
(H): Hold down this key and Left Mouse Button + drag a model icon to move the model up or down.
(L): Hold down this key and Left Mouse Button + drag a model icon to scale the model.
(R): Hold down this key and Left Mouse Button + drag a model icon to rotate the heading of the model.

(N): Holding down this key while moving objects will now ensure that the objects only move along the X axis. This also applies to the Move and Advanced Move effects in Movie mode.
(M): Holding down this key while moving objects will now ensure that the objects only move along the Z axis. This also applies to the Move and Advanced Move effects in Movie mode.

Other Keys:
(F12): Drag Model mode lets you move objects by clicking directly on them and dragging the mouse to move them. In addition, (H) lets you move objects up and down while (R) allows you to rotate them.
(G): This function will make objects that you are moving or placing in your scene snap to the Lumion terrain while ignoring all other object types.
(F): The orientation of all objects (apart from Trees/plants) can be made to adapt to the surface angles of other objects. Move object button -> Press (F) for "Flatten" -> Move the object(s) to make them adapt to the surface angles of other objects. This function only works on surfaces that are facing the sky, i.e. less than 90 degree angles.
(SHIFT) + Move selected object(s): Press (SHIFT) while dragging selected objects to move them horizontally with snapping turned off.
(SHIFT) + Rotate selected object(s): Press (SHIFT) while rotating objects to temporarily turn the 45 degree angle snapping off.
(K) + Rotate selected object(s): Press (K) while rotating objects to make all of the objects face the mouse cursor.


Selecting Models When Object Icons are Aligned:
Multiple objects (Imported Models or Lumion Library) can be Aligned or positioned at the same location.  To select the model you want:
1. Place the mouse over the Object Icons.
2. Use the keyboard Navigation Up and Down keys to scroll through the models.
3. As you scroll through, each model will be highlighted in green.
3. Click on the models Object Icon to select it.




CONTEXT MENU
Use the selection methods from above with the Context Menu to alter the position, size, rotation and alignment of objects.


 
Same Height/Same Rotation command: The selected objects will be placed at the same height as the object you clicked on.
  • Select objects -> Context Menu -> Click on the icon of the object that has the height you want the other objects to inherit -> Transformation -> Same height.
Same Rotation command: The selected objects will inherit rotation from the object you clicked on.
  • Select objects -> Context Menu -> Click on the icon of the object that has the rotation you want the other objects to inherit -> Transformation -> Same Rotation.
Place On Ground command: The selected objects will be placed on the Lumion Terrain or the Imported Object if it is Marked as Terrain.
  • Select objects -> Context Menu -> Click on the icon of the object that has the rotation you want the other objects to inherit -> Transformation -> Place On Ground.
Space command: The selected objects will be placed in a straight line as defined by the object that you clicked on to execute the command and the object that is furthest away from that object.
  • Select objects -> Context Menu -> Click on the selection icon of one of the selected objects -> Transformation -> Space.
Align command: This command lets you centre selected objects so that their pivot points are at the same position.
  • Select objects -> Context Menu -> Transformation -> Align. If you need to move or manipulate one of the overlapping objects, place the mouse cursor over the small overlapping object selection icons and use the (Arrow Up)/(Arrow Down) keys to toggle between the objects.
Reset Size Rotation command: The selected objects will be set to their size and rotation when originally placed in the scene.
  • Select objects -> Context Menu -> Click on the selection icon of one of the selected objects -> Transformation -> Reset Size Rotation.
Space XZ command: The selected objects will be moved at their current height, and spaced evenly between the first and last object selected in the XZ world plane.
  • Select objects -> Context Menu -> Click on the selection icon of one of the selected objects -> Transformation -> Space XZ.
Randomize command: This command lets you randomize the selected objects Position, Rotation or Rotation/Scale.
  • Select objects -> Context Menu -> Click on the selection icon of one of the selected objects -> Transformation -> Randomize.
Lock Position command: The selected objects will be locked for position, height, size and rotation.
  • Select objects -> Context Menu -> Click on the selection icon of one of the selected objects -> Transformation -> Lock Position.

MASS MOVE
CTRL + Left Mouse Button: Add a Node to the current Path.
Right Mouse Button: Remove a Node from the current Path.
SHIFT: A line is drawn to preview curves and smoothing of the Path.


MYLUMION
(CTRL) + (1) (2) … (9) (0): Use these keys to save up to 10 Viewpoints. When using MyLumion, the Photos are saved only for MyLumion Viewpoints.




SA Knowledge Base
© 2011 - 2017 SMFHacks.com